Short answer: Used Okuma machines listed on dealer sites in early November 2026 had a median asking price of about $54,000, with the middle half running from about $19,500 to about $114,500. Okuma buyers pay for the OSP control generation and the thermal-stability design as much as for the machine itself.
Updated November 12, 2026. Asking prices on dealer sites in our index as of the November 6, 2026 run. They are asking prices, not confirmed sale prices.
What are used Okuma machines asking right now?
The median asking price across Okuma machines currently listed by dealers is about $54,000, and the middle half falls between roughly $19,500 and $114,500. As with any brand-wide number, it mixes lathes, vertical mills and multitasking machines, so use it for orientation and compare your own machine on family, year and control. See price history by make and live Okuma listings.
Does the OSP control generation matter on an Okuma?
It is one of the first questions. Okuma's OSP-P500 is the newer control, and Okuma says any OSP-P300 program runs on the P500 (Okuma), which softens the penalty for an older P300 machine in a shop that already runs both. Machines with earlier OSP generations compete on price and condition.
| Control | Position | What it means for resale |
|---|---|---|
| Earlier OSP generations | Older THINC and OSP-P-series machines | Priced on condition; check parts and support |
| OSP-P300 | Previous generation (Okuma white paper dated 2013) | Large installed base; programs run on P500 |
| OSP-P500 | Current generation (Okuma comparison video, March 2024) | Newer machines; strongest asking prices |
Control positions come from Okuma's own materials; check the data plate for the exact control.
Why do buyers value Okuma's thermal design?
Okuma's Thermo-Friendly Concept combines machine design and control compensation to hold dimensions as temperatures change (Okuma Europe), and Okuma says it removes the need for a machine warm-up routine (Okuma brochure). Shops cutting tight-tolerance parts will pay for a machine that keeps that feature intact, so confirm that the thermal sensors and compensation are working.
Which Okuma families do buyers search for?
The GENOS line is Okuma's affordable-excellence range and has the most priced listings; MULTUS multitasking machines sit at the top of the asking range; and other lines such as LB lathes and MB machining centers are priced by their own model and year. Brand-wide numbers hide those differences.
Tax treatment is part of what a buyer will pay. For tax years beginning in 2026 the Section 179 expensing limit is $2,560,000, and it phases out once a buyer places more than $4,090,000 of equipment in service (IRS Rev. Proc. 2025-32). Used equipment can qualify, so a buyer financing this year may be able to deduct the purchase; their tax adviser decides.
How should I sell an Okuma?
Document the OSP model, options, hours and a video under power, and price against current asking prices for the same family. Okuma buyers tend to be loyal to the brand, so listing the control and thermal features clearly speeds inquiries. See our valuation service.
Selling a Okuma?
Send us the make, model, year, control and hours and we will tell you how it compares with what is listed now.
Request a valuationFrequently asked questions
How much is a used Okuma worth?
Dealer asking prices we index have a median near $54,000, but the spread is wide. Family, control generation, hours and configuration decide where a specific machine sits.
Does OSP-P300 or OSP-P500 matter for resale?
P500 is the newer control and commands more interest, but Okuma says P300 programs run on P500, so P300 machines remain easy to integrate.
What is Okuma's Thermo-Friendly Concept?
It is Okuma's combination of machine design and control compensation intended to keep accuracy stable as temperatures change.
Are these prices what Okumas sell for?
No. They are dealer asking prices from our index, not confirmed sale prices.